Epson bx305fw Ink Cartridges

Some practical tips for Epson bx305fw Ink Cartridges

Posted by

As the cost-effective choice, Epson cartridges could be better served for you if you know it very well. To day I will give you some practical advices about how to store, replace and install Epson bx305fw Ink Cartridges. Perhaps you have neglected some detailed operations about ink cartridges, but you do not know how much harm you would bring to the total printing equipment.
Epson bx305fw Ink Cartridges
First of all, you have to store the cartridges indoor to avoid sunshine, strong ray and heat source. You should not tear down the air seal before it being installed. Otherwise, the opened cartridges will get flowed or get dry cause of contact with air. To achieve the best printing effect, you’d better finish it within six month after it is installed to the printer.

In addition, it is time for you to change Epson bx305fw Ink Cartridges while the ink light is lit up. You have to make sure the ink is ran out and then take it out. Remember never to take unfinished ink out and reinstall it into the printer. Or the printing would arise some error due to the air which had already invaded into the cartridges during the repeating installation. Inkjet printer should be power on within one week even if you do not use it. If not, the ink close to the ink mouth would be solidification with paper or air dust. And I strongly suggest you washing the nozzle frequently if you want to length it service life.

Moreover, when the red light keeps shinning, you should change the ink cartridges immediately, thus avoiding some errors caused by electric memory of the printer. Before installing Epson bx305fw Ink Cartridges, you have to tear down the air seal and make sure every hole is completely opened. After installing, you have to buckle up the protecting clap and press the clean up print until it finishes charging. Once a new cartridge installed, you should check the nozzle first to ensure it goes well. If there are some break line or a lack of a kind of color, you’d better clean it again until it goes well. Otherwise, there is short of color or partial color of your printing.

Leave a Reply

Your email address will not be published. Required fields are marked *